Go to MPEP - Table of Contents
714.18 Entry of Amendments [R-2] - 700 Examination of Applications
714.18 Entry of Amendments [R-2]
Amendments are stamped with the date of their receipt in the Technology Center (TC). It is important to observe the distinction which exists between the stamp which shows the date of receipt of the amendment in the TC ("Technology Center Date" stamp) and the stamp bearing the date of receipt of the amendment by the Office ("Office Date" stamp). The latter date, placed in the left-hand corner, should always be referred to in writing to the applicant with regard to his or her amendment. >For Image File Wrapper (IFW) processing, see IFW Manual.<
All amendments received in the technical support staff sections are processed and with the applications delivered to the supervisory patent examiner for his or her review and distribution to the examiners.
Every mail delivery should be carefully screened to remove all amendments replying to a final action in which a time period is running against the applicant. Such amendments should be processed within the next 24 hours.
The purpose of this procedure is to ensure uniform and prompt treatment by the examiners of all applications where the applicant is awaiting a reply to a proposed amendment after final action. By having all of these applications pass over the supervisory patent examiner's desk, he or she will be made aware of the need for any special treatment, if the situation so warrants. For example, the supervisory patent examiner will know whether or not the examiner in each application is on extended leave or otherwise incapable of moving the application within the required time periods (see MPEP § 714.13). In cases of this type, the applicant should receive an Office communication in sufficient time to adequately consider his or her next action if the application is not allowed. Consequently, technical support staff handling will continue to be special when these applications are returned by the examiners to the technical support staff.
>Evaluation of the amendment after final rejection for compliance with 37 CFR 1.121 should be left to the examiner, and not treated by the technical support staff before forwarding the amendment to the examiner. If the examiner determines that the proposed amendment is not in compliance with 37 CFR 1.121, the examiner should notify applicant of this fact and attach a Notice of Non-Compliant Amendment to the advisory action.<
The amendment or letter is placed in the file, given its number as a paper in the application, and its character endorsed on the file wrapper in red ink. >For IFW processing, see IFW Manual.<
When several amendments are made in an application on the same day no particular order as to the hour of the receipt or the mailing of the amendments can be assumed, but consideration of the application must be given as far as possible as though all the papers filed were a composite single paper.
After entry of the amendment the application is "up for action." It is forwarded to the examiner, and he or she is responsible for its proper disposal. The examiner should immediately inspect the amendment as set forth in MPEP § 714.05. After inspection, if no immediate or special action is required, the application awaits examination in regular order.
See MPEP § 714.03 for the treatment of preliminary amendments and non-final amendments that are not in compliance with 37 CFR 1.121. See MPEP § 714.22 for treatment of non-compliant amendments after final rejection.
Go to MPEP - Table of Contents