Go to MPEP - Table of Contents
§ 1.52 Language, paper, writing, margins, compact disc specifications. - PATENT RULES
§ 1.52 Language, paper, writing, margins, compact disc specifications.
(a) Papers that are to become a part of the permanent United States Patent and Trademark Office records in the file of a patent application or a reexamination proceeding.
(1) All papers, other than drawings, that are submitted on paper or by facsimile transmission, and are to become a part of the permanent United States Patent and Trademark Office records in the file of a patent application or reexamination proceeding, must be on sheets of paper that are the same size, not permanently bound together, and:
(i) Flexible, strong, smooth, non-shiny, durable, and white;
(ii) Either 21.0 cm by 29.7 cm (DIN size A4) or 21.6 cm by 27.9 cm (8 1/2 by 11 inches), with each sheet including a top margin of at least 2.0 cm (3/4 inch), a left side margin of at least 2.5 cm (1 inch), a right side margin of at least 2.0 cm (3/4 inch), and a bottom margin of at least 2.0 cm (3/4 inch);
(iii) Written on only one side in portrait orientation;
(iv) Plainly and legibly written either by a typewriter or machine printer in permanent dark ink or its equivalent; and
(v) Presented in a form having sufficient clarity and contrast between the paper and the writing thereon to permit the direct reproduction of readily legible copies in any number by use of photographic, electrostatic, photo-offset, and microfilming processes and electronic capture by use of digital imaging and optical character recognition.
(2) All papers that are submitted on paper or by facsimile transmission and are to become a part of the permanent records of the United States Patent and Trademark Office should have no holes in the sheets as submitted.
(3) The provisions of this paragraph and paragraph (b) of this section do not apply to the pre-printed information on paper forms provided by the Office, or to the copy of the patent submitted on paper in double column format as the specification in a reissue application or request for reexamination.
(4) See § 1.58 for chemical and mathematical formulae and tables, and § 1.84 for drawings.
(5) If papers that are submitted on paper or by facsimile transmission do not comply with paragraph (a)(1) of this section and are submitted as part of the permanent record, other than the drawings, applicant, or the patent owner, or the requester in a reexamination proceeding, will be notified and given a period of time within which to provide substitute papers that comply with paragraph (a)(1) of this section in order to avoid abandonment of the application in the case of an applicant for patent, termination of proceedings in the case of a patent owner in a reexamination proceeding, or refusal of consideration of the papers in the case of a third party requester in a reexamination proceeding.
(6) Papers that are submitted electronically to the Office must be formatted and transmitted in compliance with the Office's electronic filing system requirements.
(7) If the papers that are submitted electronically to the Office do not comply with paragraph (a)(6) of this section, the applicant, or the patent owner, or the requester in a reexamination proceeding, will be notified and given a period of time within which to provide substitute papers that comply with paragraph (a)(6) of this section in order to avoid abandonment of the application in the case of an applicant for patent, termination of proceedings in the case of a patent owner in a reexamination proceeding, or refusal of consideration of the papers in the case of a third party requester in a reexamination proceeding.
(b) The application (specification, including the claims, drawings, and oath or declaration) or reexamination proceeding and any amendments or corrections to the application or reexamination proceeding.
(1) The application or proceeding and any amendments or corrections to the application (including any translation submitted pursuant to paragraph (d) of this section) or proceeding, except as provided for in § 1.69 and paragraph (d) of this section, must:
(i) Comply with the requirements of paragraph (a) of this section; and
(ii) Be in the English language or be accompanied by a translation of the application and a translation of any corrections or amendments into the English language together with a statement that the translation is accurate.
(2) The specification (including the abstract and claims) for other than reissue applications and reexamination proceedings, and any amendments for applications (including reissue applications) and reexamination proceedings to the specification, except as provided for in §§ 1.821 through 1.825, must have:
(i) Lines that are 1 1/2 or double spaced;
(ii) Text written in a nonscript type font (e.g., Arial, Times Roman, or Courier) lettering style having capital letters which are at least 0.21 cm (0.08 inch) high; and
(iii) Only a single column of text.
(3) The claim or claims must commence on a separate physical sheet or electronic page (§ 1.75(h)).
(4) The abstract must commence on a separate physical sheet or electronic page or be submitted as the first page of the patent in a reissue application or reexamination proceeding (§ 1.72(b)).
(5) Other than in a reissue application or reexamination proceeding, the pages of the specification including claims and abstract must be numbered consecutively, starting with 1, the numbers being centrally located above or preferably below, the text.
(6) Other than in a reissue application or reexamination proceeding, the paragraphs of the specification, other than in the claims or abstract, may be numbered at the time the application is filed, and should be individually and consecutively numbered using Arabic numerals, so as to unambiguously identify each paragraph. The number should consist of at least four numerals enclosed in square brackets, including leading zeros (e.g., [0001]). The numbers and enclosing brackets should appear to the right of the left margin as the first item in each paragraph, before the first word of the paragraph, and should be highlighted in bold. A gap, equivalent to approximately four spaces, should follow the number. Nontext elements (e.g., tables, mathematical or chemical formulae, chemical structures, and sequence data) are considered part of the numbered paragraph around or above the elements, and should not be independently numbered. If a nontext element extends to the left margin, it should not be numbered as a separate and independent paragraph. A list is also treated as part of the paragraph around or above the list, and should not be independently numbered. Paragraph or section headers (titles), whether abutting the left margin or centered on the page, are not considered paragraphs and should not be numbered.
(7) If papers that do not comply with paragraphs (b)(1) through (b)(5) of this section are submitted as part of the application, the applicant, or patent owner, or requester in a reexamination proceeding, will be notified and given a period of time within which to provide substitute papers that comply with paragraphs (b)(1) through (b)(5) of this section in order to avoid abandonment of the application in the case of an applicant for patent, termination of proceedings in the case of a patent owner in a reexamination proceeding, or refusal of consideration of the papers in the case of a third party requester in a reexamination proceeding.
(c)
(1) Any interlineation, erasure, cancellation or other alteration of the application papers filed must be made before the signing of any accompanying oath or declaration pursuant to § 1.63 referring to those application papers and should be dated and initialed or signed by the applicant on the same sheet of paper. Application papers containing alterations made after the signing of an oath or declaration referring to those application papers must be supported by a supplemental oath or declaration under § 1.67. In either situation, a substitute specification (§ 1.125) is required if the application papers do not comply with paragraphs (a) and (b) of this section.
(2) After the signing of the oath or declaration referring to the application papers, amendments may only be made in the manner provided by § 1.121.
(3) Notwithstanding the provisions of this paragraph, if an oath or declaration is a copy of the oath or declaration from a prior application, the application for which such copy is submitted may contain alterations that do not introduce matter that would have been new matter in the prior application.
(d) A nonprovisional or provisional application may be in a language other than English.
(1) Nonprovisional application. If a nonprovisional application is filed in a language other than English, an English language translation of the non-English language application, a statement that the translation is accurate, and the processing fee set forth in § 1.17(i) are required. If these items are not filed with the application, applicant will be notified and given a period of time within which they must be filed in order to avoid abandonment.
(2) Provisional application. If a provisional application is filed in a language other than English, an English language translation of the non-English language provisional application will not be required in the provisional application. See § 1.78(a) for the requirements for claiming the benefit of such provisional application in a nonprovisional application.
(e) Electronic documents that are to become part of the permanent United States Patent and Trademark Office records in the file of a patent application or reexamination proceeding.
(1) The following documents may be submitted to the Office on a compact disc in compliance with this paragraph:
(i) A computer program listing (see § 1.96);
(ii) A "Sequence Listing" (submitted under § 1.821(c)); or
(iii) A table (see § 1.58) that has more than 50 pages of text.
(2) A compact disc as used in this part means a Compact Disc-Read Only Memory (CD-ROM) or a Compact Disc-Recordable (CD-R) in compliance with this paragraph. A CD-ROM is a "read-only" medium on which the data is pressed into the disc so that it cannot be changed or erased. A CD-R is a "write once" medium on which once the data is recorded, it is permanent and cannot be changed or erased.
(3)
(i) Each compact disc must conform to the International Standards Organization (ISO) 9660 standard, and the contents of each compact disc must be in compliance with the American Standard Code for Information Interchange (ASCII).
(ii) Each compact disc must be enclosed in a hard compact disc case within an unsealed padded and protective mailing envelope and accompanied by a transmittal letter on paper in accordance with paragraph (a) of this section. The transmittal letter must list for each compact disc the machine format (e.g., IBM-PC, Macintosh), the operating system compatibility (e.g., MS-DOS, MS-Windows, Macintosh, Unix), a list of files contained on the compact disc including their names, sizes in bytes, and dates of creation, plus any other special information that is necessary to identify, maintain, and interpret the information on the compact disc. Compact discs submitted to the Office will not be returned to the applicant.
(4) Any compact disc must be submitted in duplicate unless it contains only the "Sequence Listing" in computer readable form required by § 1.821(e). The compact disc and duplicate copy must be labeled "Copy 1" and "Copy 2," respectively. The transmittal letter which accompanies the compact disc must include a statement that the two compact discs are identical. In the event that the two compact discs are not identical, the Office will use the compact disc labeled "Copy 1" for further processing. Any amendment to the information on a compact disc must be by way of a replacement compact disc in compliance with this paragraph containing the substitute information, and must be accompanied by a statement that the replacement compact disc contains no new matter. The compact disc and copy must be labeled "COPY 1 REPLACEMENT MM/DD/YYYY" (with the month, day and year of creation indicated), and "COPY 2 REPLACEMENT MM/DD/YYYY," respectively.
(5) The specification must contain an incorporation-by-reference of the material on the compact disc in a separate paragraph (§ 1.77(b)(4)), identifying each compact disc by the names of the files contained on each of the compact discs, their date of creation and their sizes in bytes. The Office may require applicant to amend the specification to include in the paper portion any part of the specification previously submitted on compact disc.
(6) A compact disc must also be labeled with the following information:
(i) The name of each inventor (if known);
(ii) Title of the invention;
(iii) The docket number, or application number if known, used by the person filing the application to identify the application; and
(iv) A creation date of the compact disc.
(v) If multiple compact discs are submitted, the label shall indicate their order (e.g. "1 of X").
(vi) An indication that the disk is "Copy 1" or "Copy 2" of the submission. See paragraph (b)(4) of this section.
(7) If a file is unreadable on both copies of the disc, the unreadable file will be treated as not having been submitted. A file is unreadable if, for example, it is of a format that does not comply with the requirements of paragraph (e)(3) of this section, it is corrupted by a computer virus, or it is written onto a defective compact disc.
[43 FR 20462, May 11, 1978; paras. (a) and (d), 47 FR 41275, Sept. 17, 1982, effective Oct. 1, 1982; para. (c), 48 FR 2709, Jan. 20, 1983, effective Feb. 27, 1983; para. (d), 49 FR 554, Jan. 4, 1984, effective Apr. 1, 1984; para. (c), 57 FR 2021, Jan. 17, 1992, effective Mar. 16, 1992; paras. (a) and (b) amended, 61 FR 42790, Aug. 19, 1996, effective Sept. 23, 1996; paras. (a), (c) & (d) revised, 62 FR 53131, Oct. 10, 1997, effective Dec. 1, 1997; para. (e) added, 65 FR 54604, Sept. 8, 2000, effective Sept. 8, 2000 (effective date corrected, 65 FR 78958, Dec. 18, 2000); paras. (a), (b), and (c) revised, 65 FR 54604, Sept. 8, 2000, effective Nov. 7, 2000; para. (d) revised, 65 FR 57024, Sept. 20, 2000, effective Nov. 29, 2000; paras. (a) and (b) revised, 68 FR 38611, June 30, 2003, effective July 30, 2003]
Go to MPEP - Table of Contents